Cables
Sometimes XBB Dongle® needs an extra cable to reach the diagnostic socket, or to share it with other equipment. Here are the harnesses made for exactly that.
Read moreThe harnesses and what they are for, in short
XBB Dongle® is normally plugged straight into the diagnostic socket of the vehicle. If the socket sits awkwardly an extension cable solves it, and if it is already in use by other equipment a Y splitter harness solves the problem.
When an extra cable is needed
If you already have something fitted in the OBD2 socket, a Y splitter shares the socket between the two units. If the socket is hard to reach, for example far up under the dashboard, an extension cable moves the Dongle out to a position where it can be mounted properly. For some car models there is also a purpose made harness.
The Dongle has to sit firmly
This matters when you use an extra cable in your installation: XBB Dongle® must be in firm contact with the interior of the car and must not hang freely from the cable. The Dongle has a built in accelerometer, that is a motion sensor of the same kind that turns the screen of your phone when you lay it on its side. It senses when the car moves and wakes the unit from standby. A loosely hanging Dongle registers the movement less well, so it can fail to wake when you start the car.
Which cable do I need?
Below are the harnesses available, with article numbers and dimensions. If you are unsure what your installation needs, ask your reseller. The connection to the vehicle differs between car models, so they know what is usually needed.
The harnesses
Y splitter
Shares the diagnostic socket between two units, for anyone who already has other equipment fitted in the socket.
- Art. no. IDAB-2020-0922-1
- About 200 mm long
- 1:1 wiring
- Two female connectors plus one male
Extension cable
Moves XBB Dongle® out from a hard to reach diagnostic socket to a position where it can be mounted firmly.
- Art. no. IDAB-2020-0922-2
- About 230 mm long
- 1:1 wiring
- One female connector plus one male
Adapter cable for XBB Dongle®
For fitting XBB Dongle® on vehicles built on the Mercedes MRA2 platform.
- Art. no. IDAB-2025-0113-1
Relay harness for XBB PP-CAN-FD®
Ready made harness for installing XBB PP-CAN-FD®, which wires into the electrical system of the vehicle instead of the diagnostic socket.
- Art. no. IDAB-2023-1003-1
The documents for the XBB units the cable connects to are on the page Declaration of Conformity.
XBB and compatible car models
Thinking about using XBB products? Have a look through our compatible car models to see whether we have a recipe that fits your car.
Want to know more, or do you have a question? Have a look in our FAQ to see whether it is already answered there.







